Waves multirack has failed to initialize

#Waves multirack has failed to initialize how to
#Waves multirack has failed to initialize install
#Waves multirack has failed to initialize driver
#Waves multirack has failed to initialize license
#Waves multirack has failed to initialize Offline

#Waves multirack has failed to initialize how to

How to fix: either update your SD console software version, which will update the remote control software, or contact DiGiCo support or Waves Support for assistance. This indicates that the remote control software installed on the console requires updating.

You might see an error message вЂњThe remote control library installed on the console is not the latest version.

This message is incorrect and can be disregarded.

Disconnecting a DiGiCoвЂЇconsoleвЂ™sвЂЇLAN port will prompt a вЂњWaves mirror brokenвЂќ message.

There is no remote integration option for SuperRack on DiGiCo S-Series consoles.

SuperRack remote integration is supported only on DiGiCo SD/Quantum Series consoles.

Workaround: Press Apply after un-assigning the previous console remote control. If you have DiGiCo software v1143 and above, this message is most likely incorrect.

#Waves multirack has failed to initialize install

Please install the latest versionвЂќ after un-assigning a previous console remote control and assigning a new one.

You may receive this error, вЂњThe remote control library installed on the console is not the latest version.

How to fix: Load the session in MultiRack > Remove/replace the Sonnox plugins > Save.

When trying to load a legacy MultiRack session that includes Sonnox plugins, SuperRack will hang, and you will need to force-quit.

On Mac systems with touchscreens, it is not possible to select a plugin or assign an input using single-touch, only using a mouse.

Dugan parameter changes in snapshots might not be imported correctly without real connections.

When importing an MRDB session with Dugan into SuperRack, itвЂ™s important to create real connections and activate Dugan in MultiRack prior to saving and importing into SuperRack.

Presets created in the StudioRack plugin chainer cannot be imported into SuperRack.

#Waves multirack has failed to initialize license

In certain cases, if a large amount of bundle or single plugin licenses are activated on your computer or flash drive, you may experience longer loading time of the SuperRack application due to license scanning.

For fast snapshot changes, use an SSD (or faster) drive.

Snapshot change time depends partially on your disk speed.

Changing snapshots with different rack input or output levels will introduce audible clicks.

Selecting вЂHigh PerformanceвЂ™ may require Admin or IT privileges.

#Waves multirack has failed to initialize driver

Audio streamed via the SoundGrid Driver WDM into a SoundGrid network may be distorted if WindowsвЂ™ вЂHigh-PerformanceвЂ™ profile is not selected.Connecting to a SoundGrid network via Thunderbolt 3 is currently not supported.Recording and playing back over 32 channels using your local Apple ethernet port is not recommended and may cause random audio drops.For best performance of audio transport from the SoundGrid Core Audio Driver to the SoundGrid network, Apple computer users should use one of the adapters listed on this page.We strongly advise that you remove, disable, or turn off all VPN software while working with SoundGrid. These changes may affect the network ports used for SoundGrid and may compromise performance of the SoundGrid network. VPN software can alter network settings to meet its requirements.If updating the firmware of your SoundGrid server or interface via a network switch results in errors, connect the unit directly to your computer and repeat the firmware update.

#Waves multirack has failed to initialize Offline

The latest supported firmware version for the XI-WSG I/O SoundGrid Card for Roland (1.17.14) is available only as part of the V11 offline installer.

Workaround: change the driverвЂ™s network buffer to 512 or lower.

If the outputs of a DiGiGrid D / Q / M interface are patched to a Soundgrid Driver, audio will not pass if the Driver Network Buffer is set to 1024 samples in the Soundgrid host application.

For IO Sharing between SuperRack and eMotion LV1, both applications must be aligned to the same version (v11 or v12).

We are currently working on fixing a critical bug in the firmware for the Cadac SoundGrid I/O. Until further notice, Cadac users are advised to stay with MultiRack V9 and not use SuperRack or other SoundGrid host applications.If other SoundGrid interface/s are added to the same network, make sure to set a different SoundGrid interface (not from the D, Q & M product line) as the SOE master. D, Q and M Interfaces can function as the network SOE (clock) master only when they are the only interface/s in the SoundGrid network.